CNC Base machinery / CNC machinery: Type EuroMod
Assembly instruction / Operating instruction for EuroMod 30, 45, 65
page 2
Copyright
©
isel Germany AG
, 2010
All rights reserved.
Despite
all
care,
printing
errors
and
mistakes
cannot
be
excluded.
For suggestions and information on errors, we are grateful.
CE mark for (complete) CNC machinery:
isel
CNC machinery are CE compliant and marked accordingly. For these machinery
the CE declaration of conformity is valid.
No CE mark for partly completed CNC machinery:
Partly completed machinery (definition from EC machinery directive 2006/42/EC) has
no CE mark.
For partly completed machinery the declaration of incorporation (referred to in Annex
II, part 1, section B) is valid.
For all other machinery parts and components, be applied to the CE safety directives,
initial operation are prohibited until all appropriate requirements are met.
The company
isel Germany AG
assumes no responsibility or liability if you make any
changes without the consent of the manufacturer of the machine that affect the CE-
conformity of the machine.
The EMC test is valid only for the controller’s original configuration ex works, i.e. the
delivery state.
Manufacturer:
isel Germany AG
Bürgermeister-Ebert-Straße 40
D-36124 Eichenzell
Tel: (06659) 981-700
Fax: (06659) 981-776
e-mail: [email protected]
Item-no: 970275 BE203, Translation of
Original Operating Instruction
in German language
State:
01/2010
Technical specifications subject to change. Up to date Operating instructions and
manuals for download you can find here:
