CNC Base machinery / CNC machinery: Type EuroMod
Assembly instruction / Operating instruction for EuroMod 30, 45, 65
page 36
Grease properties:
The
isel
special grease has the following properties:
Enormously wearout reduction
less grease consumption
mixable with lithium and calcium greases
water resistant
highly resistant against cold- hot- and salt-water as well as solvent
temperature range:
–25°C till 200°C
fail safe >300°C
up to six fold service life extension
extremely good adhesion to metal surfaces
Classification and marking complies with the EC directives 67/548/ EC and 88/379/
EC
– water hazard class 1.
Before you start up lubrication of the axis
1.) Move the X-axis and Y-axis to the centre of the traversing area and the Z-Axis up to
their reference position.
2.) Open the safety door / cover of the machine and switch off the main switch of the
control.
3.) Unplug the main power supply cable of the machine from AC net.
9.2.3 Lubrication of the X axis
EuroMod 30/45/65: Grease nipples at the X
axis
At the X axis (on the machine frame fix
mounted traverse axis) there are two black
or white plastic stoppers. They can be
reached from the operating position when
the door / cover is open.
Under the plastic stoppers
there are the grease nipples
for the X axis central lubrication.
Pull the stoppers out and lubricate the axis:
Put the grease gun over the viewable and
accessable grease nipples and press the
grease gun.
When finished push the stoppers back into
their original position.
