CNC Base machinery / CNC machinery: Type EuroMod
Assembly instruction / Operating instruction for EuroMod 30, 45, 65
page 37
9.2.4 Lubrication of the Y axis
EuroMod 30/45: Grease nipple at the Y axis
At the Y axis (this axis moves the
clamping plate forwards and back)
there is one black or white plastic
stopper. It can be reached from the
operating position when the door /
cover is open.
.
Under the plastic stopper
there is the grease nipple
for the Y axis central lubrication.
Pull the stopper out and lubricate the
axis: Put the grease gun over the
viewable and accessable grease
nipple and press the grease gun.
When finished push the stopper back
into their original position.
EuroMod 65: Grease nipples at the Y axis
At both linear units of Y axis (this
axis moves the clamping plate
forwards and back) there is each one
black or white plastic stopper. It can
be reached from the operating
position when the door / cover is
open.
Under the plastic stopper
there is the grease nipple
for the Y axis lubrication.
Pull each of the stoppers out and
lubricate the axis: Put the grease gun
over the viewable and accessable
grease nipple and press the grease
gun.
When finished push the stoppers
back into their original position.
