CNC Base machinery / CNC machinery: Type EuroMod
Assembly instruction / Operating instruction for EuroMod 30, 45, 65
page 7
2 Intended use and reasonably foreseeable misuse
isel
CNC machinery /
isel
CNC base machinery are CNC controlled machinery with more
than one linear axis resp. one or two optional rotation axis. The motor power amplifiers will
be driven via a PC based CAN-CNC-control (CANopen standard). All control and power
electronics for the axis is mounted in a control cabinet.
Differences between CNC-machine and CNC-base-machine:
isel
CNC machine:
In the new, at 29.12.2009 legally binding machine directive 2006/42/EC, is the term
“
machinery
” defined as follows (quote from EC directive, acticle 2, letter a):
„
machinery“
an assembly, fitted with or intended to be fitted with a drive system other than directly applied human or
animal effort, consisting of linked parts or components, at least one of which moves, and
which are joined
together for a specific application.
Each isel-CNC-machine delivered
with a tool
(e.g. milling or engraving spindle, metering
device, measuring device like CCD camera or triangulation laser, water jet nozzle, plasma
burner), is for the purpose of the directive 2006/42/EC a machine, because she was
manufactured for a specific purpose resp.
specific application
and therewith a specific
usage.
The usage results from the kind of tool which is mounted on a moveable axis, e.g.:
tool = milling tool
usage for milling, drilling
tool = engraving tool
usage for engraving
tool = metering device
usage for metering
tool = water jet nozzle
usage for water jet cutting
The manufacturer isel Germany AG is able to effect a legal prescribed risk assessment for
the CNC-machines. CNC-machines will be delivered with a machinery enclosure.
isel
CNC base machine:
In the new, at 29.12.2009 legally binding machine directive 2006/42/EC, is the term
“
partly
completed machinery
” defined as follows (quote from EC directive, acticle 2, letter g):
„
partly completed
machinery”
An assembly which is almost machinery but
which cannot in itself perform a specific application
. A drive
system is partly completed machinery. Partly completed machinery is only intended to be incorporated
into or assembled with other machinery or other partly completed machinery or equipment, thereby
forming machinery to which this Directive applies;
Each
isel-CNC-base-machine
delivered
without a tool
and therefore
not for a specific
application
is for the purpose of the directive 2006/42/EC a
partly completed machine
.
The CNC-machine / CNC-base-machine is used for work in dry rooms (workshops,
laboratories) and industrial firms (max. ambient temperature: 40°C)
CNC-machine:
o
The
CNC-machine (complete machine
) is according to the type mounted on the machine tool
appropriately
used. That is, the concrete tool of the CNC machine specifies the intended use of
the machine within the meaning of the Machinery Directive (Annex I, Section 1.1.2). Under this
premise, the CNC-machine is suitable for milling, drilling, cutting, engraving, metering, measuring
or water jet cutting. The CNC-machine is not suitable for graphite machining.
