CNC Base machinery / CNC machinery: Type EuroMod
Assembly instruction / Operating instruction for EuroMod 30, 45, 65
page 1
About this manual
Used shortcuts
MD
Machinery Directive 2006/42/EC
SCM
Safety Circuit Module
Used symbols
You will find different symbols in this manual that signalizes important information/
facts and danger.
Warning!
This symbol indicates dangers that cause damages for person’s health,
physical injury or death.
Warning! Dangerous voltage!
Warning of danger from electricity. Ignoring can lead to serious injury or
death.
Attention!
This Symbol indicates important notes. Ignoring this symbol leads to
damages and malfunctions of the machinery.
Information:
This symbol indicates important information and notes.
Observe the safety instructions
Before you put into operation the CNC machine / CNC base machine EuroMod,
work with the machine or make additions or changes to/with the wiring of the
machines electrical control cabinet / in the housing of the machine, make sure to
read carefully:
the safety instructions in this manual (Chapter 3) and
the safety instructions for DC / AC Power amplifiers in the Operating
manuals for Servo positioning modules with CANopen Interface /1.1/ resp.
/1.2/
This Operating instruction has to be found near the CNC machine, so it has to be
guaranteed that the user has always access to the information inside it.
