manualshive.com logo in svg

iPECS LIP-9000 Series, User Manual

Share
Download
iPECS LIP-9000 Series User Manual Download Page 73

 

 
 

LIP-9000 Series 

User Guide - ST- Issue 1. 5

 

65 

Regulatory Information   

[EU] 

European Union Declarations of Conformity 

Ericsson-LG Enterprise Co., Ltd. declares that the equipment specified in 
this document bearing the “CE” mark conforms to the European Union 
Radio and Telecommunications Terminal Equipment Directive (R&TTE 
1999/5/EC), including the Electromagnetic Compatibility Directive 
(2004/108/EC) and Low Voltage Directive (2006/95/EC). 

Copies of these Declarations of Conformity (DoCs) can be obtained by 
contacting your local sales representative. 

[USA/CSA] 

FCC/IC Interference Statement   

This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to part 15 of the FCC Rules.   

These limits are designed to provide reasonable protection against harmful 
interference in a residential installation.   

This equipment generates, uses and can radiate radio frequency energy 
and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following 
measures:   

  Reorient or relocate the receiving antenna.   

  Increase the separation between the equipment and receiver.   

  Connect the equipment into an outlet on a circuit different from that to 

which the receiver is connected.   

  Consult the dealer or an experienced radio/TV technician for help.   

This device complies with part 15 /RSS-GEN of the FCC/IC rules. 
Operation is subject to the following two conditions: 

 

Summary of Contents for LIP-9000 Series














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands