LIP-9000 Series
User Guide - ST- Issue 1. 5
15
Busy Presence of UCS Client
DND Presence of UCS Client
2.2 Using the Speakerphone
Activate the iPECS Speakerphone at any time (except for Paging) in place
of lifting the handset to receive or place calls.
Additionally, you may switch between the handset and Speakerphone
during a call. By keeping the handset Off-hook, the
Group Listen
feature is
activated, which provides incoming audio over the speaker with outgoing
audio from the handset. This permits a local ‘group’ to listen to both sides of
the conversation without interfering with the conversation.
While in a conversation using the Speakerphone,
Mute
the microphone
using the MUTE button. When Mute is active, the MUTE button LED will be
illuminated. To turn off Mute, press the MUTE button again.
With
Auto Speaker Select
, activating or accessing a feature, or placing a
call by pressing a flexible button will activate the Speakerphone
automatically.
When using a Headset, the SPEAKER button controls the ON/OFF-hook
state for the phone.
To use the Speakerphone to answer or place a call:
Press the SPEAKER, the phone goes off-hook and sends audio to the
speaker and from the microphone.
To control the volume of the Speakerphone or handset:
Press the VOL
▲▼
button.
To mute the microphone: (Speakerphone or handset)
Select the MUTE button.
To turn off Mute (turn the microphone ON):
Press the MUTE button.
To activate Group Listen while on an active handset call:
Press the SPEAKER button.
Summary of Contents for LIP-9000 Series
