36
LIP-9000 Series
User Guide - ST - Issue 1.5
Repeat the above steps for additional parties.
Select the CONF Softkey again to establish the conference.
To place a Conference on Hold:
Press the HOLD(SAVE) button.
To retrieve the Conference from Hold:
Select the CONF Softkey.
To establish an Unsupervised Conference:
Establish conference with two external parties.
Select the CONF Softkey.
Hang-up the handset.
To retrieve an Unsupervised Conference:
Lift the handset.
Select the CONF Softkey.
5.4.1 Setting up a Conference Room
In addition to establishing an ad hoc Conference, up to 9
Conference
Rooms
can be set up, letting up to 32 parties converse when using a
Conference module. When setting up a Conference Room, a password
can be designated for invited parties (internal and external parties) to use
for accessing the established Conference Room.
To set-up a Conference Room:
Press the TRANSFER(PGM) button.
Dial 53 to create a Conference Room, (for UCP/eMG).
Dial the desired Conference Room number (1-9).
To assign a password for the Conference Room, enter the password (up
to 5 digits).
Press the HOLD(SAVE) button to establish the Room.
To join a Conference Room:
Lift the handset.
Dial 59, (Conference Room entry code for UCP/eMG).
Dial the Conference Room Number (1-9).
Summary of Contents for LIP-9000 Series
