iPECS LIP-9000 Series, User Manual

Page: 38 / 77

30 LIP-9000 Series User Guide - ST - Issue 1.5

Dial *.

Press the Navigation up and down buttons to select from the last 15
numbers dialed.

Press the SEND Softkey or HOLD(SAVE) button.
4.3.2 Using and Entering Saved Number Dial
You may store the last number dialed on an external call to the Saved
Number Dial buffer for convenient dialing later. The Saved number, which
can be up to 24 digits, is stored until a new number is saved.
To place a call using Save Number Dial:

Press the SPEED button.

Dial #.
To store a number in the Save Number Dial:

While on an outgoing external call, press the SAVE Softkey, or press
SPEED button twice.
4.3.3 Using System Speed Dial Numbers
The iPECS system has memory allocated for System Speed Dial numbers.
These numbers may be divided into groups called System Speed Zone
Groups . In this case, you may be allowed access to some numbers and not
others and dialing restrictions may be invoked.
Only an Attendant or Administrator can assign System Speed Dial
numbers.
To place a call using System Speed Dial:

Lift the handset.

Press the SPEED button.

Dial the desired System Speed Dial bin number. Bin numbers should be
available through your iPECS system Administrator.
4.3.4 Using Station Speed Dial Numbers
The iPECS system provides Station Speed Dial numbers; telephone
numbers you commonly dial. The number of entries in this Private Directory
may vary but is typically 100 accessed by bin numbers (000 – 099). Contact
your system Administrator for details. These numbers, which are entered at
your station, may include several ‘special’ instructions.