iPECS LIP-9000 Series, User Manual

Page: 54 / 77

46 LIP-9000 Series User Guide - ST - Issue 1.5
To place a call using numbers stored in the Call Log:

From the Call Log, use the Navigation up/down keys, to select the log
menu (Called, Dialed, or Lost),
Call Log
1.
1006
2. 1001
3. LEE K D
4. KIM M J
5. 1003
BACK SEND SELECT
▶

Highlight the desired item, and press the OK button to call the number.
If you are using an LIP-9020, LIP-9030, or LIP-9040, you may press the
SEND Softkey to call the number
To save an external number to your Station Speed dial:

Use the Navigation up/down buttons to highlight the desired Call log
item.

Press the HOLD(SAVE) button. Note for the LIP-9020, LIP-9030 and
LIP-9040, you can save the number to a Speed Dial by pressing the
SELECT Softkey then the SAVE Softkey.
8.1.1 Line Access Codes
The outside line access code in a log item is used to seize an outside line
when placing an external call using the call log. Up to 5 line access codes
can be saved.
Normally, the first line access code is the default outside line group code,
typically ‘9’, but, if the telephone number is the same as a Speed Dial
number, the first line access code is the access code in the Speed Dial
number. Therefore, the first line access code of each call log can be
different but is not be editable.
If you are using an LIP-9020, LIP-9030 or LIP-9040, you can assign Line
access codes 2 - 5. You may select a code for use when placing external
calls from the call log.
To select an access code:

From the Call Log, use the right Navigation key, to advance to the next
3 Softkeys,