Device installation
-
3
-
02
Device installation
2.1
Install your device to a wall box
Before you install the device, make sure that an electrical wall box is installed and there’s an Ethernet cable
through the box.
1.
Detach the device’s cover plate using a screw-driver.
2.
Connect the Ethernet cable in the wall box to the LAN port on the rear panel of the device.
3.
Install the device in the wall box and verity that the Ethernet cable is positioned properly.
4.
Fasten the device with the included screws. Adjust the screws to ensure that the device is flush with the wall
for proper fitting of the cover plate.
5.
Attach the cover plate to the device.
Summary of Contents for AP255_US
Page 1: ......
Page 7: ...Get to know the device 2 1 3 Hardware descriptions...
