Web UI functions
-
30
-
Application scenario
In the following application, employees in the hotel can only connect to SSID1 to access the server, guests of the
hotel can only connect to SSID2 to access the internet, but the administrator can access both the server and the
internet. In this case, we can set up VLAN 10 for SSID1 and the server, VLAN 20 for SSID2 and the router, and VLAN
30 for the administrator, the server and the router.
Note that the server and the router in this application must support QVLAN function. If not, you need to add a
layer 3 switch to achieve the requirements.
Configure VLAN function
To achieve the requirements, you need to configure the following devices.
Configure this device
Configure the PoE switch
Configure the server
Configure the router
Configure this device
:
1.
Log in to the device’s web UI.
2.
Go to
Wireless > Basic
. Enable both two SSIDs, and modify the two SSID name to
IP-COM_1
and
IP-COM_2
respectively.
Summary of Contents for AP255_US
Page 1: ......
Page 7: ...Get to know the device 2 1 3 Hardware descriptions...
