Web UI functions
-
46
-
4.6.11
Uplink Detection
On this page, you can circularly detect whether the device is reachable to the specified hosts. If the device loses
its uplink connectivity, it forces the clients to re-associate with another device by disabling SSID broadcast
function.
To enable uplink detection
:
1.
Log in to the device’s web UI.
2.
Go to
Tools > Uplink Detection
.
3.
Set up the parameters.
1)
Uplink Detection: Check the box to enable this function.
2)
Ping Host1/Host2: Enter an IP address. Usually it’s the device’s gateway, that is to say, the uplink router’s
LAN IP address.
3)
Ping Interval: Set up an interval that the device starts to ping.
4.
Click
Save
to make these settings take effect.
Summary of Contents for AP255_US
Page 1: ......
Page 7: ...Get to know the device 2 1 3 Hardware descriptions...
