IP-COM AP255_US, User Manual

Page: 37 / 55

Web UI functions
-
32
-
Configure the PoE switch :
Switch Port Allowed VLAN ID Port Type PVID
Connect to this device 1, 10, 20, 30 Trunk port 1
Connect to the server 1,10, 30 Trunk port 1
Connect to the router 1,20, 30 Trunk port 1
Configure the server :
The port connecting to the PoE switch should allow VLAN 10 and VLAN 30 to get through.
Configure the router :
The port connecting to the PoE switch should allow VLAN 20 and VLAN 30 to get through.
4.5 SNMP
SNMP (Simple Network Management Protocol) is now the most widely used network management protocol on
TCP/IP network. Through SNMP, A NMS (Network Management Station) can remotely manage all SNMP agents,
including monitoring network status, modifying network device, receiving network alarm events, and so on.
Regardless of different devices’ physical feature, SNMP can achieve automation management of devices from
different manufactories, which is especially suitable for small-scale, high-speed and low-cost network.
Parameter description:
Parameter Description
SNMP Enable or disable this function.
Administrator Name,
Device Name,
Location
For these three parameters, please enter their actual values. These parameters are
only used for the SNMP host to recognize this device. When this device and the SNMP
host start to negotiate, they don’t need the three parameters.
Read Community
It is used to negotiate with the SNMP host, that is to say, this parameter on both the
device and the SNMP host must be the same. The default is public.