Web UI functions
-
14
-
To set up LAN IP address manually
:
1.
Log in to the device’s web UI.
2.
Go to
Network > LAN Setup
.
3.
Set up LAN IP parameters.
1)
Address Mode: Click the dropdown list and select
Static IP
.
2)
IP Address: Enter a new IP address, such as
192.168.0.2
.
3)
Subnet Mask: Enter a subnet mask for the IP address, such as
255.255.255.0
.
4)
Gateway: Enter a gateway for the device so that the device can find a network route to connect to the
internet or other networks. Usually it’s the uplink router’s LAN IP address.
5)
Primary DNS Server:
Enter the primary DNS server address. If there is another backup DNS server, enter
it into Secondary DNS Server field.
A correct DNS server allows you to access websites using their domain names instead of IP addresses.
6)
Device Name: Enter a distinct name for your device so that the administrator can manage the device
from a remote spot if necessary.
4.
Click
Save
to make these settings take effect.
Summary of Contents for AP255_US
Page 1: ......
Page 7: ...Get to know the device 2 1 3 Hardware descriptions...
