IP-COM AP255_US, User Manual

Page: 23 / 55

Web UI functions
-
18
-

QVLAN : On this page, you can enable/disable and set up VLAN parameters. With this device and a switch
with QVLAN function, you can manage different wireless network.
4.4.1 Basic
On this page, you can set up basic wireless parameters of this device, such as SSID, broadcast SSID, encryption
type, and so on.
Parameter description
As the device provides lots of wireless parameters, to help you understand these parameters, we devide them into
several parts, shown as below.

Commonly used parameters description

Parameter description of WEP

Parameter description of WPA-PSK, WPA2-PSK and mixed WPA/WPA2-PSK

Parameter description of WPA and WPA2
Commonly used parameters description
Parameter Description
SSID Select a SSID to be modified. This device supports two SSIDs.
Enable Enable or disable the selected SSID.
Broadcast SSID
Enable or disable broadcast SSID function.

Enable: the device broadcasts its SSID and the SSID is displayed in the network list of clients
that support 5G.

Disable: the device does not broadcast its SSID and the SSID is not displayed in the network
list of clients that support 5G. When a client want to connect to the device, the client needs
to manually enter the correct SSID name.
AP Isolation

Enable: Wireless clients that connect to the SSID can't communicate with each other.

Disable: Wireless clients that connect to the SSID can communicate with each other.
WMF
It is used to optimize multicast situation. After you enable this function, only the actual
receivers can obtain corresponding packets. It saves wireless bandwidth and provides a more
secure and reliable network.
Client limit
Set up the maximum number of wireless clients allowed to connect to the SSID. When the
amount of wireless clients reaches this value, any new client can’t connect to the SSID unless
some connected clients disconnect from the SSID.