Invacare® Storm®⁴
CAUTION!
There is a risk of injury if the mobility device is
not properly secured during use as a vehicle seat.
–
If possible, the user should always leave the mobility
device to use a vehicle seat and the safety belts
provided with the vehicle.
–
The mobility device should always be anchored facing
in the transport vehicle's intended direction of travel.
–
The mobility device must always be secured in
accordance with the mobility device and anchoring
system manufacturers’ user manual.
–
Always remove and secure any accessory parts fixed
to the mobility device such as chin controls or tables.
–
If your mobility device is fitted with an angle adjustable
backrest, then it must be placed in an upright position.
–
Fully lower elevated legrests, if fitted.
–
Fully lower the seat lifter, if fitted.
CAUTION!
Risk of injury exists if a mobility device that is not
fitted with leak-proof batteries is transported in a
vehicle.
–
Only ever use leak-proof batteries.
CAUTION!
Risk of injury or damage to the mobility device or
to the transporting vehicle, if the legrests are in a
raised position while the mobility device is used
as a vehicle seat.
–
Always completely lower height-adjustable legrests, if
fitted.
In order to use a mobility device as a motor vehicle seat,
it needs to be fitted with attachment points to enable
anchoring in the motor vehicle. These accessories may be
included in the standard scope of mobility device order and
delivery in some countries (UK for example), but may also
be obtained from Invacare as an option in other countries.
This mobility device complies with the requirements of ISO
7176-19:2001 and may be used as a vehicle seat in connection with an
anchoring system that has been checked and approved in accordance
with ISO 10542. The transporting vehicle must be professionally
converted to anchor the mobility device. Contact your vehicle’s
manufacturer for more information.
The mobility device has undergone a crash test in which it was
anchored in the transporting vehicle's direction of travel. Other
configurations were not tested. The crash test dummy was secured
using pelvic and upper body safety belts. Both types of safety belt
should be used in order to minimize the risk of injuries to head or
upper body.
It is imperative that the mobility device is inspected by an authorized
dealer before being used again after being involved in a crash.
Alterations to the mobility device anchoring points may not be
carried out without the manufacturer's permission.
10.3.1
How the mobility device is anchored in a
vehicle for use as a vehicle seat
The mobility device is fitted with four anchoring
points, which are labelled with the symbol shown
on the right. Snap hooks or belt loops can be used
for fixation.
88
1529686-P
