Invacare® Storm®⁴
4 Getting in and out of the mobility
device
–
The armrest must be removed in order to get into or
out of the mobility device from the side.
4.1
Removing the standard armrest in order to
side transfer
1.
Remove the remote cable
A
from the remote. Refer to 4.2
Disconnecting the remote, page 22.
2.
Loosen wing nut
B
.
3.
Remove the armrest from the receptacle.
4.2
Disconnecting the remote
1.
Switch off the remote.
2.
Pull the plug
A
of the remote cable to disconnect the remote.
4.3
Information about getting in and out
Getting into the mobility device:
1.
Position your mobility device as close as possible to your seat.
This might have to be done by an attendant.
2.
Switch your mobility device off.
3.
Apply the manual wheel lock of your mobility device (if existing).
4.
Depending on the armrest type of your mobility device, detach
the armrest or swivel it up.
5.
Now slide into the mobility device.
Getting out of the mobility device:
1.
Drive your mobility device as close as possible to your seat.
2.
Switch your mobility device off.
3.
Apply the manual wheel lock of your mobility device (if existing).
22
1529686-P
