Invacare® Storm®⁴
1.
On both sides, loosen and remove the upper backrest screw
A
.
2.
Set the required backrest angle.
Use scale
B
on the backrest for this purpose. Ensure that you
set the same angle on both sides.
3.
Re-insert and tighten the screw.
Simple backrest
Requirements:
•
1 x 6 mm Allen key
1.
On both sides, loosen and remove the middle backrest screw
A
.
2.
Set the required backrest angle in 7.5° steps.
Ensure that you set the same angle on both sides.
3.
Re-insert and tighten the screw.
6.7.7
Adjusting the adaptable backrest padding
There are two ways of adapting the backrest padding.
•
Using a snap buckle which is accessible without having to remove
the backrest cushion. Please see
Method 1
.
•
With adjustment straps which are adjustable using Velcro.
Please see
Method 2
.
Method 1
1.
Open the Velcro straps on the left-hand side of the backrest
cushion.
2.
Open the individual snap buckles (1) on the adjustment straps.
3.
Adjust the strap tension as required and then close the snap
buckle again.
4.
Close the backrest cushion Velcro fastenings again.
Method 2
42
1529686-P
