Invacare® Storm®⁴
1.
Use the open-ended spanner to loosen the nut (1) and remove.
2.
Adjust to the desired depth. Please observe that the round holes
are intended for the calf pad retaining screw and the oblong
holes for the aglet without thread.
3.
Screw the nut back on and tighten.
7.5.5
Adjusting the height of the calf pad
Requirements:
•
1 x 4 mm Allen key
1.
Use the Allen key to loosen the screws (1).
2.
Adjust to the desired position.
3.
Re-tighten the screws.
70
1529686-P
