Invacare Storm 4 X-plore, User Manual

Page: 50 / 104

Invacare® Storm®⁴
Seat
depth
in cm
Holes used
in front seat
frame order
no.: 1524550 Holes used
in rear seat
frame order
no.: 1524555 Seat
support
plate
required
38 6 & 7 A & B
41 5 & 7 A & C
43 4 & 6 A & C
SHORT
order no.
1526437
43 4 & 6 A & C
46 3 & 5 A & C
48 2 & 4 A & C
MEDIUM
order no.
1526438
48 2 & 4 A & C
51 1 & 3 A & C
53 1 & 2 B & C
LONG
order no.
1526439
2. Adjust the seat depth as described in the following chapter:
- If the seat support plate does not need to be replaced, please
refer to chapter 6.13.3 Adjusting the seat depth without replacing
the seat support plate, page 50.
- If the seat support plate does need to be replaced, please refer
to chapter 6.13.4 Adjusting the seat depth with replacing the seat
support plate, page 51.
6.13.3 Adjusting the seat depth without replacing
the seat support plate
Exploded drawing of seat support
Disassembly:
1. Remove the armrests.
2. Remove the seat cushion.
3. Remove the cover plates (1).
4. Undo and remove the two Allen screws (8) which are located
on the side at the rear of the seat support plate, and connect
these to the crossmembers (4).
50 1529686-P