Scorpius
Service Manual
1654773~A
51
Re-Installation Instructions:
❖
During re-installation of the screws and washers, please be careful about the placement of the gears on
each side. The flat side of the gear must be flush with the front frame and the white dot must face
upwards. An incorrect installation can result in a failure and will damage the scooter. See Figure 1 on the
right for the correct arrangement.
❖
When re-installing the small and large metal rods apply some silicon oil to make installation easier (see
Figure 2 on the right).
•
Step 5. Front frame can be replaced with a new one and can also be repaired.
•
Step 6. If the rear frame is not separated completely, and it needs to be replaced, please
refer to SERVICE-13-6 Sliding Base Repair.
