Scorpius
Service Manual
1654773~A
33
2.8.2
SERVICE-08-2 Seat Base Spring Repair
Please refer to
steps first and follow Step 2 of
then:
1. Remove the seat bar screws
(6 mm, 2 pcs).
2. Take out the seat base
spring.
❖
When reassembling, follow
the exact reverse sequence
of these steps.
2.8.3
SERVICE-08-3 Seat Locking Pin Repair
Please refer to
to remove the seat base, then:
1. Hold in place quick-release screw on backside. Loosen the quick-release screw.
2. Take the quick-release screw out.
3. Remove the top washer.
4. Remove the seat locking pin and spring from the other side of the seat base.
5. Take out the seat spring.
❖
When reassembling, follow the exact reverse sequence of these steps.
•
Step 1. When opening the bar spring, be careful not to use too much force which might
damage the spring.
•
Step 2. For re-installation, please hook the spring onto the locking plate of the seat base
from below. If it is to be removed, please refer to
SERVICE-08-2 Seat Base Spring Repair
3a.
3b.
