Rea® Dahlia® 30 / 45
8.
L
M
Mount the push handles/push bar intended for the bent
backrest tube
M
and tighten the knob
L
.
There are different push handles/push bar for
the straight backrest tube and the bent backrest
tube.
9.
C
C
Re-mount the safety shackle
C
and attach the gas
piston.
WARNING!
Safety risk
The wheelchair may collapse
– Remember to always reinsert and fasten the
safety pin when it has been removed.
2.2 Placing the wires
2.2.1 Wires with backrest plate
A
B
1.
Thread the wires on the outside of the backrest tubes
B
.
2.
Place the wires in the holders/clips
A
in order to hold
them in place.
Fold the slack of the wires under the seat to get
them out of the way.
2.2.2 Wires with tension adjustable backrest
A
B
C
C
D
E
1.
Place the wires
A
and
B
as shown on the picture above.
Risk of damage to the wires
– It is important that the cable for the
assistant brake
A
is placed on the inside of
the backrest tubes.
2.
Place the wire for the backrest/seat recline
B
outside of
the backrest tubes.
3.
Place both of the wires on the inside of the backrest
attachment
C
.
4.
Attach the wires to the backrest tubes
E
with the straps
D
.
Fold the slack of the wires under the seat to get
them out of the way.
CAUTION!
Risk of reduced brake effect
– The wires must not be crossed on the backrest!
6
1572308-G
Summary of Contents for REA Dahlia 30
Page 51: ...Notes...
