Assembly
2.11 Mounting the user maneuvered tilt
The user operated tilt is available with both a fixed
armrest and with detachable armrests. The user
operated tilt is only available for Dahlia 30.
Dahlia 4
5
Dahlia 4
5
Dahlia 4
5
Fixed armrests
Detachable armrests
Detachable armrests
A
B
1.
Press and hold the quick release button
A
.
2.
Remove the existing armrest
B
by pulling it upwards.
C
3.
Mount the new armrest for the user operated tilt
C
.
Fixed armrests
A
B
C
D
E
1.
Loosen the screw
B
.
2.
Drag the transport attachment
E
and the armrest
A
outwards.
3.
Loosen the screws
C
and the nut
D
.
•
5 mm allen key
•
10 mm fixed spanner
4.
Remove the armrest
A
and the armrest attachment
completely.
B
G
E
5.
Push the transport attachment
E
back in place.
6.
Tighten the screw
B
.
5 mm allen key
7.
Remove the plastic plugs
G
from the chassis.
H
J
I
8.
Mount the armrest and armrest attachment tube for the
user operated tilt
H
on the frame.
9.
Attach the screws
I
and tighten the nuts
J
.
•
5 mm allen key
•
10 mm fixed spanner
Detachable and fixed armrest
K
L
1.
Mount the tilt reduction bushing
K
on the seat tilt gas
piston
L
if needed.
IMPORTANT
– When using the user operated tilt, there
must always be two tilt reduction bushings
mounted.
M
N
O
1572308-G
9
Summary of Contents for REA Dahlia 30
Page 51: ...Notes...
