Rea® Dahlia® 30 / 45
Cable lock — actuator
Cable lock removal
A
1.
Loosen the cable lock
A
.
Use a screwdriver to loosen the cable lock.
2.
Remove the cable lock from the actuator.
CAUTION!
Damage to the product
– When a cable lock is removed, it must be
replaced by a new one.
Mount the cable lock
A
B
1.
Place the cable in the holder
C
on the seat tilt actuator.
The cable must be fully pressed into the holder
before adding the cable lock
B
.
2.
Attach the cable lock
B
by pushing it into place on the
seat tilt actuator.
CAUTION!
Risk of damage to the product
– The cable lock must be mounted when washing
the wheelchair.
2.22.4 Mounting the control box
Dahlia 30
A
E
F
B
C
D
1.
Mount the upper part of the control box attachment
A
in the attachment
B
on the chassis.
2.
Mount the lower part of the control box attachment
C
in the attachment
D
on the chassis.
3.
Attach the control box attachment
C
with the pin
E
and the locking washer
F
.
Nippers
Dahlia 45
1.
A
B
B
Loosen and remove the screws
A
from the attachment
plates
B
.
5 mm Allen key
2.
A
B
C
A
Mount the control box attachment
C
on the attachment
plates
B
.
3.
Re-mount the screws
A
in order to fixate the control
box attachment.
4.
Tighten the screws with 24 Nm.
5 mm Allen key
Extension kit — control box
In order to fit the control box to Dahlia width 49, an
extension kit for the holder needs to be used:
A
B
B
18
1572308-G
Summary of Contents for REA Dahlia 30
Page 51: ...Notes...
