Settings and Adjustments
A
Rear wheel can come loose
– Tighten the rear wheel nut
A
with 40 +/- 5 Nm
24 mm fixed spanner
3.11 Adjusting the seat height and balance point
with the rearwheel attachment
For Dahlia, there are two different sizes of rearwheel
attachment:
High
Low
The position of the rearwheel attachment can be adjusted,
turned and changed in order to change the balance point
and the seat height of the chair. The following sections will
show and explain the different options of rearwheel position.
3.11.1 Rearwheel attachment — standard position
A
B
The standard position for the high rearwheel attachment
A
and the low rearwheel attachment
B
is in the most
outer position. This is the position of the rearwheel when
receiving the product.
3.11.2 Turning the rearwheel attachment
It is only possible to turn the low version of the
rearwheel attachment, not the high version.
1.
A
B
Loosen and remove the attachment screws
A
from the
rearwheel attachment
B
.
5 mm allen key
2.
Turn the rearwheel attachment around.
3.
B
A
Re-attach the rearwheel attachment
B
on the same side.
4.
Re-tighten the screws
A
with 22 Nm.
5.
Repeat the procedure on the opposite side.
5 mm allen key
D
E
When turning the rearwheel attachment, you can mount it
either in position
D
or position
E
. Position
D
gives a lower
seat height and position
E
gives a higher seat height.
See section: “Seat height tables” for more information about
position of the rearwheel attachment and seat heights.
1572308-G
29
Summary of Contents for REA Dahlia 30
Page 51: ...Notes...
