Assembly
2 Assembly
2.1 Changing the backrest tubes
1.
A
B
Release the knob
A
and remove the push handles /
push bar intended for the straight backrest tube
B
.
2.
C
C
Release the safety shackle
C
and carefully remove the
safety pin from the attachment.
3.
D
Loosen and remove the screw washer and nut
D
from
the backrest attachment.
When re-mounting the backrest (see instructions
below), a new screw must be used, the old one
must be scrapped.
4.
4x
x4
D
E
F
Loosen the four screws for the backrest tubes
D
and
turn the attachments
E
in order to release the backrest
tube
F
.
Do not remove the screws.
5.
H
2x
G
Mount the attachments for the MatrX backrest
G
and
tighten the screws
H
.
Tools: 5 mm Allen key
6.
2x
I
J
Mount the backrest tubes
I
on the attachment knobs
J
on the backrest.
Start with the lower attachment.
7.
K
Re-mount the backrest on the wheelchair, replace the
screw and tighten the screw, washer and nut
K
(9 Nm).
1572308-G
5
Summary of Contents for REA Dahlia 30
Page 51: ...Notes...
