Invacare 9000 SL, Owner'S Operator And Maintenance Manual

Page: 19 / 45

19
REPLACING DESK/FULL LENGTH
ARMREST PAD AND/OR CLOTHING
GUARDS (FIXED HEIGHT ARMS ONLY)
(FIGURE 3)
Armrest Pad
1. Remove the mounting screws that secure the
armrest pad to the armrest assembly.
2. Replace armrest pad and securely tighten with
the existing mounting screws.
Clothing Guard
1. Remove the four (4) mounting screws that se-
cure the existing clothing guard to the armrest
assembly.
2. Install NEW clothing guard and securely tighten
with the existing mounting screws.
ARMS PROCEDURE 5
REMOVING OR REPLACING ARMREST
(9000 XT/9000XT RECLINER/9000XDT
WHEELCHAIRS) (FIGURE 4)
WARNING
Make sure the armrest release lever is in the
locked position before using the wheelchair.
Removing Armrests
1. Unlock the armrest by turning the armrest re-
lease levers towards the outside of the wheel-
chair.
2. Lift armrest completely out of arm sockets from
the wheelchair.
Replacing Armrests
NOTE: Armrest release levers MUST be in the
unlocked position when placing armrests into
the arm sockets.
1. Place armrest into arm sockets located on the
side of the wheelchair.
2. Lock the armrest by turning the armrest release
levers towards the inside of the wheelchair.
FIGURE 3 - REPLACING DESK/FULL LENGTH
ARMREST PAD AND/OR CLOTHING GUARDS
(FIXED HEIGHT ARMS ONLY)
A
R
M
S
Clothing
Guard
Armrest
Assembly
Armrest Pad
Mounting
Screws
Mounting
Screws
Mounting
Screws
Armrest
Release
Lever
Arm Socket
Arm
Socket
Armrest
Release
Lever
FIGURE 4 - REMOVING OR REPLACING
ARMREST (9000 XT/9000XT RECLINER/
9000XDT WHEELCHAIRS)
Armrest