12. ACCESSORY #2
rcuit is powered by the Port Battery System and a 15-amp circuit breaker
rotects its circuitry.
to the terminal
nder the Control Helm at the location with the 14 AWG Orange/White wire.
not exceed 15-amps. Failure to do so may cause
amage to your boat or it’s electrical system.
VERHEAD LIGHT (OPTION)
hts Independently. If your top only contains white lights you will have a single position
witch.
powered by the Starboard Battery System and a 15-amp circuit
inal
an be
nder the Mid Bilge Access Hatch just adjacent to the Control Helm on the Port side.
size does not exceed 15-amps. Failure to do so may cause damage to your boat or it’s
PREADER LIGHTS (OPTION)
The Accessory #2 circuit provides a means to add additional equipment to your Intrepid.
The Accessory #2 ci
p
By placing the ACCY 2 Switch handle in the ON (up) position power is provided
block u
NOTE
If connecting an owner supplied accessory to this circuit ensure that the accessory
manufacturer’s recommended fuse size does
d
O
If your boat was fitted with an Intrepid installed T-Top or Hardtop this accessory circuit is used to
supply power and control the Spreader Lights found on the overhang. If your Top contains Red
and White overhead lights you have a dual position switch which will operate either the Red or
White lig
s
13. ACCESSORY #3
The Accessory #3 circuit provides a means to add additional equipment to your Intrepid.
The Accessory #3 circuit is
breaker protects its circuitry.
By placing the ACCY 3 Switch handle in the ON (up) position power is provided to the term
OVERHEAD LIGHT
block under the Control Helm at the location with the 14 AWG Orange with Blue striped wire.
A 14AWG Red and Black wire pair are coiled and labeled as Accy 3. This coiled wire c
found u
NOTE
If connecting an owner supplied accessory to this circuit ensure that the accessory manufacturer’s
recommended fuse
electrical system.
S
D-17
