ANCHOR ROLLER
A stainless steel anchor roller chute has been installed in the bow pulpit of your boat as standard
equipment. The anchor roller guides an anchor into the pulpit for retrieval and positions a stowed
anchor for free fall deployment. While the anchor is stowed the chute secures the anchor to
prevent it from damaging the surface of the boat.
NOTE
As with any moving part, keep your hands, feet and clothing away from the anchor roller when it
is in operation.
CLEATS
A total of six mooring cleats has been installed on your boat and are located:
(2) 10” Popup Bow cleats - one each Port and Stbd
(2) 10” Popup Spring Cleats - one each Port and Stbd
(2) 10” Stern Cleats with Hawse Hole - one each Port and Stbd
NOTE
The cleats installed on your boat are for mooring purposes only. They are not suitable for lifting or
towing the boat.
ANCHOR LOCKER
The anchor locker provides the means to store the anchor rode and chain. Inside the locker is a
bitter end for attaching the end of the anchor rode to the boat.
The anchor locker is drained overboard. To prevent standing water from collecting in the anchor
locker ensure that the drains are free from debris.
CABIN HATCH
An opening 24” x 24” hatch is installed on the Cabin House Top. The hatch provides light,
ventilation and an emergency cabin exit.
To maintain a good seal check the hatch gasket on occasion to ensure that it is pliable and free
from debris.
CABIN SKYLIGHTS
Two opening skylights in the Cabin overhead provide light and ventilation.
To maintain a good seal check the hatch gasket on occasion to ensure that it is pliable and free
from debris.
OIL TANK FILLS
F-2
