The level of water in the Baitwell is maintained by the height of the drain tube, which fits within the
drain fitting.
SEACOCK
3/4" NPT
HANDLE IN
CLOSED POSITION
HANDLE IN
OPEN POSITION
HOSE TO SALT
WATER PUMP
BAITWELL
PUMP
HOSE TO
BAITWELL
THRU HULL
3/4" NPT
NOTE
The Baitwell will fill beyond capacity if the Baitwell Pump is ON and The Baitwell Drain Seacock
Valve is OFF.
To drain the Baitwell the drain tube must be removed from the drain fitting in the Baitwell and the
Baitwell Drain Seacock Valve must be opened.
NOTE
The Baitwell will not drain completely when not underway. The Baitwell Drain and the Drain Thru-
hull are both below the waterline of the boat. The Baitwell will only drain to the level of the
waterline of the boat. To completely drain the Baitwell the Drain Seacock must be opened while
the boat is underway (on plane) or when the boat is out of the water. After draining the Baitwell
close the Baitwell Drain Seacock while underway.
BA
K
ITWELL DRAIN THRU-HULL & SEACOC
(VALVES SHOWN IN OPEN POSITION)
D-4
