Intplus FlexWATCH 1110, User Manual

Page: 35 / 218

Network Camera Server User’s Manual
Seyeon Tech Co., Ltd
35
Bash# ifconfig
eth0 Link encap:Ethernet HWaddr 00:30:6F:81:00:AE
inet addr:
10.10.213.22 Bcast:10.10.255.255 Mask: 255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6382 errors:0 dropped:0 overruns:0 frame:0
TX packets:294 errors:0 dropped:0 overruns:0 carrier:0
collisions:2 txqueuelen:100
Interrupt:9
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
bash#
12)
Input ‘savecfg’ command to save the changed configuration to Flash Memory.
And Input ‘reboot’ command to reboot the system.
bash#
bash#
savecfg
Saving a current config to flash memory
[ OK ]
Updated flash
bash#
bash#
bash# reboot
Broadcast message from root (ttyp0) Mon Sep 6 19:28:51
2004...
The system is going down for reboot NOW !!
bash#
5
IP Assignment for Wireless LAN
Once you assign an IP address for the LAN port connection, now you can access to
‘Admin menu’ of FW-1110W and then assign another IP address for the Wireless LAN
connection as below steps.
1)
Access to the homepage of FW1110W through the LAN port connection.
2) Go to ‘Admin Menu’ => ‘Network Configuration’ => ‘Wireless LAN’.
- INTPLUS [2005] -