Intplus FlexWATCH 1110, User Manual

Page: 182 / 218

Network Camera Server User’s Manual
Seyeon Tech Co., Ltd
71
Configuration
7) Click “Voice Mode”, then following window will show up
UDP Port :
Voice kit use UDP port to transmit Voice kit. If voice communication should be done
through WAN network, please make sure UDP port is not blocked to Internet
connection in router or firewall etc.
The default VDCP (Voice Device Control Protocol) port is 32001, please go to Network
port configuration mode to change VDCP port if required.
Application Idea
By changing VDCP port, you can install multiple Voice kit and FlexWATCH
TM
server behind
the single broadband network.
Single/Multi User:
Once Multiple users are selected, only Admin account user can enjoy full duplex
Audio and User account user can listen only.
Ringing :
This is to enable or disable sounds from the internal speaker of voice kit when there is a
connection to Voice kit from outside.
8)
Click “Save” button to save your configuration.
3
Alarm input device connection
FlexWATCH
TM
server has Alarm Sensor interface so that it can send alarm notification by
- INTPLUS [2005] -