Intplus FlexWATCH 1110, User Manual

Page: 100 / 218

Network Camera Server User’s Manual
Seyeon Tech Co., Ltd
100
9
To enable
’
Sequence Modulo
’
, input the required No. on it and select
’
Sequence
’
check-box on
option menu.
Or,
9
To enable
’
Overwrite
’
, select
’
overwrite
’
check-box on option menu.
4) Go to ‘FTP (Periodic)’ menu again. After you select ‘Directory Name’ on option table,
click ‘Save’ and ‘Make Directory’ button in order.
5) Go to ‘Advanced Services’ menu. And click ‘Apply’ button under the Status bar to
apply the new service configuration.
6) Close the window of ‘Admin menu’. When ‘Save configuration’ window pop-up, click
‘Save Configuration’.
Application idea
If server is connected to dynamic IP or Private network and you want to continuously
send image to FTP server, please use Overwrite function in the Periodic FTP service.
EXAMPLE
of Periodic FTP service)
Let’s suppose that FlexWATCH server takes one frame of the image every 15min and
sends it to FTP server continuously. And all the images are being stored under the
directory name 'flexwatch'(Base directory) in the FTP server for one year.
1)
Go to ‘Advanced Services – Non-buffering Service - FTP(Periodic) - Camera1 -
Condition1’ on the Admin menu. Select ‘Enable’ and ‘Always’, then click ‘Save’.
2)
Go to ’Camera 1’ menu.
Input 90000 units at ‘Delay between Images’ and click ‘Save’.
15(min) X 60(sec) X 100(unit) = 90000 units
3)
Go to ‘FTP (Periodic)’ menu. Please set up as below, then click ‘Save’.
- INTPLUS [2005] -