Intplus FlexWATCH 1110, User Manual

Page: 74 / 218

Network Camera Server User’s Manual
Seyeon Tech Co., Ltd
74
4) System reboot will be recommended, then click ‘Reboot’ button.
5) After rebooting, Go to Admin Menu >> System Configuration >> Serial Ports
Configuration.
6) Click “PTZ Mode”, then following window will show up
7) Select the installed PTZ Model on the dropdown menu as above.
8) Select the Channel number installed with the PTZ, and click ‘Apply’ button
2.4.2
Supported PTZ(Pan/Tilt/Zoom) Device list
• Following is list of PTZ devices which are directly supported by FlexWATCH
TM
server. Note that
some of PTZ has not been field approved, although manufacturer integrated its protocol into
FlexWATCH
TM
server. Thus, it is highly recommended for you to use only field approved PTZ device.
• In addition, although Manufacturer integrated Protocol of PTZ device and did field test, PTZ can
not be workable, since PTZ manufacturer can change its protocol or other functions. Thus, it is
highly recommended for you to contact your distributor or sales@flexwatch.com to make sure its
connectivity through FlexWATCH
TM
server.
• Although FlexWATCH
TM
server support more protocols than below listed ones, the user is
recommended to use following product only for PTZ operation.
Supported PTZ List by FlexWATCH
TM
Server
Supplier Model Command
Prese
t
Auto
PAN
Program
Only
Lab Test
Field
Test
** Pelco Spectra 485 (P) O O O
** Pelco Spectra 485(D) O O O
- INTPLUS [2005] -