Intplus FlexWATCH 1110, User Manual

Page: 68 / 218

Network Camera Server User’s Manual
Seyeon Tech Co., Ltd
68
External Device connection & configuration
External device such as Serial input device, Serial output (UART) device, PTZ
(pan/Tilt/Zoom) device, Audio kit and Alarm input and output device can be connected to
the system and controlled over the TCP/IP network.
1
Serial Ports Configuration Guide
This chapter will guide you how to install and configure Serial-interface devices.
FlexWATCH
TM
server is designed to support simultaneously TWO different Serial-
interface devices (RS-232 and RS-485) through COM and AUX ports.
1.1
Hardware Description
1.1.1
Pin-Out Information
COM Port : Standard RS-232 Cable supplied together with product should be used.
Please use Modem/Console adaptor cable to plug into RJ-45 type COM port.
AUX Port : No cable is supplied. Thus, user needs to make separate cabling to connect
external device. Following is PIN out information about AUX port.
Modem/Console Adaptor Cable
AUX port is for
RS-232 (2, 3, 5)
RS-485 (1, 4)
DI (5, 6)
DO (7, 8)
1
–
485 +
2
–
RXD
3
–
TXD
4
–
485 -
5
–
GND
6
–
DI
7
–
DO-A
8
–
DO-B
COM port is for
standard RS232.
- INTPLUS [2005] -