Intplus FlexWATCH 1110, User Manual

Page: 128 / 218

Network Camera Server User’s Manual
Seyeon Tech Co., Ltd
17
Under bright background lighting condition, the object appears dark. But in the BLC 'ON'
mode, you can obtain a clean picture.
ELC(ON/OFF)
When set to
‘ ON ’ mode, the electronic iris switch automatically varies the camera's
shutter to mimic auto-iris control, allowing fixed or manual iris lens to be used in a wider
range. When this switch is set to
‘ ON ’ mode, set the FLK switch to ‘ OFF ’ mode. When a
manual iris lens is mounted on camera, set ELC switch to
‘
ON
’
mode. When the
auto-iris lens is mounted, ELC switch should be set to
‘
OFF
’
mode.
TRM (75ohm Termination)
To terminate 75ohm switch for loop-through video output. If loop-through video is to be
used, please set it to “ON” mode.
Rear Panel View
FW-1110L FW-1110LW
A
COM
RS-232 Port to connect Console (Hyperterminal), Serial input
device, Voice kit, or Modem.
B
Auto Iris To connect Auto Iris Lens
C
Aux
To connect RS-485/232 based PTZ device. For more
information, refer to External device configuration menu.
D
LAN LAN Port for 10/100M Base T Auto sensing
E
V- OUT Loop-through video output
F
DC12V DC 12V power
G
Antenna IEEE 802.11g Built-in wireless Antenna
G A B C D E F
- INTPLUS [2005] -