Intplus FlexWATCH 1110, User Manual

Page: 99 / 218

Network Camera Server User’s Manual
Seyeon Tech Co., Ltd
99
4.2.2
Periodic FTP service configuration
Periodic FTP means that image will continuously be sent to FTP server when there is any
event. No pre/post alarm image will be sent to FTP server.
)
’Periodice FTP configuration’ can be done by the same procedure
of ’Buffered FTP configuration’ . Only the differencies are ’Sequence
modulo’, ’Overwrite’ and ’Delay time’ configurations.
Thus, you must take care all the Notice and Warning messages showing
on the above ’Buffered FTP configuration’.
1) Go to ‘Advanced Services – Non-buffering Service - FTP(Periodic) - Camera1 -
Condition1’ on the Admin menu. Set up the condition as your purpose.
2) Go to ’Camera 1’ menu. Input the required Delay units at ‘Delay between Images’
and click ‘Save’. (1 sec = 1000 msec / 1 unit = 10 msec / 1 sec = 100 unit)
3) Go to ‘FTP (Periodic)’ menu as below.
- INTPLUS [2005] -