Intplus FlexWATCH 1110, User Manual

Page: 209 / 218

Network Camera Server User’s Manual
Seyeon Tech Co., Ltd
98
‘Save Configuration’.
5
Alarm Buffering Service
Pre/Post alarm image can be stored in the system memory so that user can remotely
connect the server and playback stored image at any time.
5.1
Alarm Buffering Service Configuration
1)
Go to Advance Service menu in the service configuration mode and set up system
memory assignment for Alarm Buffer service.
2) Select “Buffering Service” option and check whether Pre Alarm buffer size is
already assigned. Otherwise, assign pre alarm butter size
3) Select “Alarm Buffer Service” from the listed option
4) Enable the Alarm buffering service.
5) Select the camera and assign Pre/post alarm image frames.
6) Click “Save” button to memorize your new setting in the system.
7) Click the Condition menu and set up alarm buffering service condition.
8) Click “Advance Service” menu in the Admin window and click “Stop and Apply”
button to start record alarm triggered image in the system memory.
)
Note that “Stop & Apply” button in the Advance Service window must be
refreshed by clicking the button to start recording of any video in the
- INTPLUS [2005] -