![background image](http://html1.mh-extra.com/html/intex/purespa-ps-bh-10/purespa-ps-bh-10_owners-manual_2081445020.webp)
292
PO
S AVE THESE INSTRUCTIONS
(292PO) BUBBLE SPA WITH POOL ENGLISH 7.5” X 10.3” PANTONE 295U 01/26/2016
English
Page 20
Spa Tub Drainage
1.
Turn off the spa control unit.
2.
Deflate the benches, and remove the benches and L shape U legs from the tub side wall.
3.
Connect the drain valve adaptor
(11)
to a garden hose and point the other end of the garden hose to a
suitable draining area
(see drawing 19).
4.
Remove the drain valve cap from outside of the spa tub and attach the drain valve adaptor to the drain
valve
(see drawing 19).
5.
From inside of the spa tub, open the drain valve cap, water will start flowing out from the garden hose.
6.
When the water stops draining, disconnect the spa control unit from the spa tub wall. Lift the spa tub wall
from the side opposite the drain, leading any remaining water to the drain and emptying the spa completely
(see drawing 20).
7.
Attached the inflation hose
(7)
to the air blower inflation outlet on the control unit.
8.
Turn on the spa and press the button, aim the inflation hose at the inlet/outlets on the spa tub and
spa control unit to dry out any water in the piping system
(see drawings 21 & 22).
9.
Use a clean towel to wipe up any remaining water and moisture on the spa tub and spa control unit.
10.
Ensure the spa tub and spa control unit are thoroughly dried.
NOTE:
The enclosed plugs
(15)
can be used to cover the water inlet and outlet connectors from the inside
of the spa tub to prevent water from flowing out.
MAINTENANCE
104
F
o
21
7
22
7
20
19
11
1
2
3