292
PO
S AVE THESE INSTRUCTIONS
(292PO) BUBBLE SPA WITH POOL ENGLISH 7.5” X 10.3” PANTONE 295U 01/26/2016
English
Page 10
SET UP (continued)
4.
Insert the horizontal beam through the bench sleeves and the spa lateral upper strap sleeves. Then
insert the protruding connectors over the L shape U legs vertical pipes
(see drawing 5)
.
Inflation
Inflate the Spa Tub Wall
1.
Press the button located on top of the control base
and remove the back cover
(see drawing 6).
2.
Unscrew the control base inflation cap
(5)
to reveal the air blower inflation outlet, insert one end of the
inflation hose
(7)
into the outlet and turn to the right to lock it
(see drawing 7).
3.
Unscrew the air valve cap to reveal the stem in the up position for inflation. Insert the other end of the
inflation hose
(7)
into the valve and turn to the right to lock it in position
(see drawing 8)
.
4.
Press the
104
F
o
button to turn on the control unit panel buttons first. Press the
104
F
o
button to inflate the
spa tub wall until it is firm to the touch but not hard
(see drawing 9)
.
IMPORTANT:
Do not over inflate or use high pressure air compressor to inflate.
5.
Press the
104
F
o
button again to turn it off.
6.
Disconnect the inflation hose
(7)
from the air valve and attach the pressure gauge
(23)
to the air valve.
The pressure gauge indicator should be in the green area for a properly inflated spa tub
(see
drawing 10)
. Repeat previous steps to add more air if necessary.
9
10
23
1
2
6
Press
5
7
5
7
8
7
1
2
