![background image](http://html1.mh-extra.com/html/intex/purespa-ps-bh-10/purespa-ps-bh-10_owners-manual_2081445007.webp)
292
PO
S AVE THESE INSTRUCTIONS
(292PO) BUBBLE SPA WITH POOL ENGLISH 7.5” X 10.3” PANTONE 295U 01/26/2016
English
Page 7
Self-contained spa fittings. – For multiple outlet use only. – Wall mounting only.
Replace suction fittings within 3 installed year. – Tool required: screwdriver.
Spa suction fitting maximum flow rate: 8.5 gpm (510 gph)
• Check suction strainer fitting and fasteners for damage or tampering before each use of the spa.
• For service and winterization instructions refer to “Maintenance” and “Storage” sections.
• Read and follow all instructions, save these instructions for future reference.
PRODUCT SPECIFICATIONS
Maximum seating capacity:
4 adults
"A" side water capacity:
210 gal (795 L)
"B" side water capacity:
310 gal (1,173 L)
Inner/outer size:
152"(3.86M)
72"(1.83M)
50"(1.27M)
72"(1.83M)
52"(1.32M)
106"(2.69M)
B
A
Height:
28 in (71 cm)
Bubble air blower:
1.1 HP / 110-120 V / 60 Hz
Filter pump flow rate:
323 gal/hr (1,222 L/hr)
Heater power:
1,300 Watts / 110-120 V / 60 Hz
Spa temperature range:
68ºF – 104ºF (20ºC – 40ºC)
Spa Temperature rise:
2-3ºF/hr (1-1.5ºC/hr)
"A" side number of Bubble Jets:
120
"B" side number of Bubble Jets:
150
Tub Liner and bench recommended
working air pressure:
0.083 bar (1.2 psi)
Cord-connected spa with pump, heater, blower, built-in hard water treatment and control panel.
The water heating function heats the water on the spa (A) side only.
The filtration system is designed to filter one side of the tub at a time only.
This product requires a minimum of 13 Amps. If the circuit breaker trips, please check that no other appliances
or other large loads are on the same circuit as the spa.
SPA SUCTION FITTING