292
PO
S AVE THESE INSTRUCTIONS
(292PO) BUBBLE SPA WITH POOL ENGLISH 7.5” X 10.3” PANTONE 295U 01/26/2016
English
Page 11
SET UP (continued)
7.
Replace the air valve cap back.
NOTE:
The cap is designed to be screwed on and off. Never exert force as this could cause the
complete internal inflation system of the valve to come loose. See “Spa Tub Air Valve Fastening” for
valve maintenance.
Inflate the Spa Benches
1.
Open the inflation valve and insert the inflation hose
(7)
into the valve; press
104
F
o
to inflate until it is
firm to the touch but not hard
(see drawings 11 & 12)
.
2.
Disconnect the inflation hose
(7)
from the inflation valve, close and recess the inflation valve.
3.
Repeat the above steps to inflate the other bench.
Inflate the Spa Cover Air Bladder
1.
Open the inflation valve and insert the inflation
hose
(7)
into the valve; press
104
F
o
to inflate
until it is firm to the touch but not hard
(see
drawing 13).
2.
Disconnect the inflation hose
(7)
from the air
blower inflation outlet and the valve.
3.
Replace the control base inflation cap
(5)
back;
close and recess the inflation valve.
NOTE:
If there is a need to add some air to the spa tub
wall or spa cover air bladder after they have been setup,
refer to above “Inflate the Spa Tub Wall” and “Inflate the Spa Cover Air Bladder” sections. The cover air
bladder is preinstalled inside the spa cover. If it needs to be reinstalled, place the uninflated air bladder
inside the spa cover lip before inflating the bladder.
Deflation
For Spa Tub Wall and Benches:
1.
Unscrew the cap to reveal the stem, push the stem
in and turn 90 degree right to secure it in the down
position
(see drawing 14).
2.
Once the deflation is completed, push the stem in
and turn 90 degree left to return it to the inflation
position.
3.
Replace the cap back.
For Cover Air Bladder:
1.
Pull valve cap out and squeeze the valve at its base until deflated.
2.
Close and recess the valve back.
14
13
7
11
7
1
2
12
