IntesisBox
®
BACnet
– RAC, FD, KX6 and KXR6 (VRF) series
User Manual r1.0 eng
URL
tel
http://www.intesisbox.com
[email protected]
+34 938047134
6/60
© Intesis Software S.L.U. - All rights reserved
IntesisBox
is a registered trademark of Intesis Software SLU
1
Description
Introduction
This document describes the integration of Mitsubishi Heavy Industries air conditioning systems into BACnet
compatible devices and systems using the
MH-RC-BAC-1
gateway
.
The aim of this integration is to monitor and control your Mitsubishi Heavy Industries air conditioning system,
remotely, from your Control Center using any commercial SCADA or monitoring software that includes a BACnet
driver, or connect it to other BACnet devices to do any automation. To do it so, IntesisBox allows BACnet
communication allowing polling or subscription requests (COV).
IntesisBox makes available the Mitsubishi Heavy Industries air conditioning system indoor units through independent
BACnet objects.
Abstraction of Mitsubishi Heavy Industries air conditioning system properties and functionalities as fixed BACnet
Objects. IntesisBox allows fixed BACnet object IDs mapping. Simple configuration is needed: just select the
appropriate communication parameters (MAC address
, baud rate…).
This document assumes that the user is familiar with BACnet and Mitsubishi Heavy Industries technologies and their
technical terms.
BACnet MS/TP installation sketch
BACnet IP installation sketch
BACnet Controller
BACnet MS/TP bus
MH-RC-BAC-1
MH-RC-BAC-1
MH-RC-BAC-1
•
SCADA
•
PLC
•
DDC
•
BMS
•
HMI
•
Controller
•
etc
BACnet Controller
MH-RC-BAC-1
MH-RC-BAC-1
MH-RC-BAC-1
•
SCADA
•
PLC
•
DDC
•
BMS
•
HMI
•
Controller
•
etc
IP Network
