IntesisBox
®
BACnet
– RAC, FD, KX6 and KXR6 (VRF) series
User Manual r1.0 eng
URL
tel
http://www.intesisbox.com
[email protected]
+34 938047134
55/60
© Intesis Software S.L.U. - All rights reserved
IntesisBox
is a registered trademark of Intesis Software SLU
Configuration tool
In order to check the status of the device, signals values and general configuration, the MH-RC-BAC-1 includes a
configuration tool. This tool is accessible only through the Ethernet port, so keep in mind that you need to switch
SW3
P1 ‘ON’.
By default the device comes with a static IP, so please check that you are in the same network domain in order to
connect. The default IP is:
192.168.100.246
.
7.5.1 Home
Once you reach the page, remember to login with your user and password. To access the login site, click on
“User”
or use the drop-down menu on the top right corner for user selection.
There are two access levels:
admin
and
operator
. The default password value for each user is
admin
admin and
operator
operator.
Admin has total control on the device configuration and it can control the AC unit from the web app itself. On the
contrary, operator can only read information from the current configuration and can operate the AC. Priority used
when using the operator mode is always set to 8.
IMPORTANT:
Once configuration is done, we recommend changing the passwords to ensure access control on the
gateway.
MH-RC-BAC-1