INTERSPORT ENERGETICS PR 40.1, Manual

Page: 22 / 127

22
Running belt tension adjustment
The treadmill has been adjusted and passed QC inspection before leaving the factory. If there is phenomenon of
bias running of the belt, the possible reasons might be:
A. The frame is not stably laid
B. The user is not running on the center of the running belt;
C. The user‟s two feet are not using even strength.
For bias which cannot be fixed automatically, try the following methods to fix the belt, as picture shown
If the belt tends to move to the right, you should turn the
belt adjustment screw on the right in clockwise direction.
We recommend you turn 1/4 turn each time and check
how it works. If the belt remains slanting to the right
,then turn the belt adjustment screw on the left in
counterclockwise direction 1/4,as shown in the picture A
If the belt tends to move to the left, then turn the belt
adjustment screw on the left in clockwise direction for
1/4 turn. If the belt remains slanting to the left ,then turn
the belt adjustment screw on the right in
counterclockwise direction for 1/4 turn, as shown in the
picture B
After having been used for a period, the belt might be
slightly elongated, and slipping and halting might appear
when a person is running on it. When these phenomena
appear, you should secure the screws on both sides for
1/4 turn. If the belt is too tight, just loosen the screw on
both sides for 1/4 turn, as shown in picture C.
A
B
C