Interroll Roller Conveyor SH 1110
Version 1.0 (06/2022) en
Translation of original operating instructions
57
Declaration of incorporation
In accordance with EC Machinery Directive 2006/42/EC, Appendix II 1 B
Manufacturer and person authorized to prepare the technical documents
Interroll Trommelmotoren GmbH
Center of Excellence Hygienic Solutions
Opelstraße 3
41836 Hueckelhoven/Baal (Germany)
herewith declares that the conveyor module described below is an incomplete machine in
accordance with the EC Machinery Directive:
• Interroll roller conveyor - straight SH 1110
The incomplete machine may only be started up if it has been determined that the complete
machine/system into which the incomplete machine is to be installed meets the requirements of
this directive.
The following safety and occupational health requirements as stated in Appendix I have been
applied:
• 1.1.2, 1.1.3, 1.1.5, 1.1.6, 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.6, 1.3.7, 1.3.8, 1.4.1, 1.4.2, 1.5.1,
1.5.2, 1.5.4, 1.5.5, 1.5.6, 1.5.8, 1.5.9, 1.6.1, 1.6.2, 1.6.4, 1.7.1, 1.7.2, 1.7.3, 1.7.4
The special technical documents mentioned in Appendix VII B have been prepared and will be
transmitted to the responsible authority if necessary. Transmission is performed electronically.
Applicable EC Directives:
• Machinery Directive 2006/42/EC
• EMC Directive 2014/30/EU
Applicable EC/EU regulations:
• Regulation 10/2011/EU
• Regulation 1935/2004/EU
Applied harmonized standards:
• EN 415-10:2014 "Safety of machinery - Ergonomic design principles - Part 1: Terminology
and classification of packaging machines and associated equipment”
• EN 619:2011-02 "Continuous handling equipment and systems - Safety and EMC
requirements for equipment for mechanical handling of unit loads"
• EN ISO 12100:2011-03 "Safety of machinery - General principles for design - Risk
assessment and risk reduction”
• DIN EN 1672-1:2014-12 "Food processing machinery - Basic concepts - Part 1: Safety
requirements”
• EN ISO 13854:2020-01 "Safety of machinery - Minimum gaps to avoid crushing of parts of
the human body"
• EN ISO 13849-1:2016-06 “Safety of machinery - Safety-related parts of control systems -
Part 1: General principles for design”
