Interroll Roller Conveyor SH 1110
Installation
Version 1.0 (06/2022) en
Translation of original operating instructions
33
Straight roller conveyor -
lateral diverter
7
2
8
5
4
3
2
6
5
1
1
Diverter
5
Torx screw (M8x20)
2
Washer
6
Roller conveyor
3
Torx screw (M8x16)
7
Module connector
4
Roller conveyor contact guard
8
Nut
This connection does not allow incline or decline.
4
Position the modules to be connected (1, 6) in such a way that the side profiles are aligned.
4
Align the top edges of the modules by using the height-adjustable feet of the supports.
4
Check horizontal alignment with a spirit level or rotation laser.
4
Secure the adjusted height.
4
Attach contact guard (4) at side profile of roller conveyor (6) and fasten it with screws (5).
4
Fasten module connector (7) on the right and left at the bottom of the side profile of the
diverter (1) with screws (3), washers (2) and nuts (8).
4
Fasten contact guard (4) and module connector (7) each with one screw (5) and washer (2)
to each other.
4
Fasten the module torsion-free, e.g., by anchoring it to the floor or to adjacent components.
