Interroll Roller Conveyor SH 1110
Installation
20
Version 1.0 (06/2022) en
Translation of original operating instructions
Installing supports
3
2
1
4
Support with two height-adjustable feet
1
Nuts
3
Torx screws
2
Washers
4
Height-adjustable foot
CAUTION
Risk of injury when lifting heavy loads
4
During the installation and replacement of conveyor modules or heavy spare parts, always
work in pairs or use suitable lifting devices.
Fasten screws with a tightening torque of 19 Nm.
The module sits on at least one support. Each support has two height-adjustable feet (4).
4
Place the module on the supports.
4
Position the supports underneath the module.
4
Fasten the rack with screws (3) and washers (2) from below as well as washers (2) and
nuts (1) inside in the side profile.
